With Blu-ray Copy Software, Copy Blu-ray to Blu-ray

With Blu-ray Copy Software, Copy Blu-ray to Blu-ray

Solution 1 : DVDFab Blu-ray Copy

Step 1) Load Blu-ray disc
Begin DVDFab, the following welcome monitor will show up. Please insert your blu-ray film on your Blu-ray-ROM, then click on the folder icon?to load it. Now specify the blu-ray disc's region code, then click on Ok. This pop-up window is utilised to get rid of the 'RCE - Location Code Enhancement' on the original DVD, that may be disabled by checking "Do not show again".



It'll open the blu-ray DVD and you also just need to wait some time for analyzing the disc.



Step 2) Start ripping process

With this particular mode, it just allows you to set BD50/BD25 inside the decreased spot beside Top quality readout. This means you can get blu-ray backups with completely the identical quality or compress it to BD25 blank disc.While you are all prepared, click the "Start" button to start the ripping process.

Step 3) Start burning process

If you have chose blu-ray burner because goal, when this ripping procedure is concluded just press the End button, you're going to be asked to insert a blank BD-R/RE from the BD-ROM.?Achieve this and start to burn off.



Right after some time you will get a concept which the process has completed efficiently, press the Finish button, then get pleasure from your popular Blu-ray copies. You should be capable of playback the disc using WinDVD seven EX, PowerDVD six.six BD, or your standalone Blu-ray player.



More Info>>


Solution 2 : Blue-Cloner

Step 1: Run Blue-Cloner.

Step 2: Place the Blu-ray disc for being copied into the push. If you would like to set up the duplicate mode, please click on and select a single from your 4 duplicate modes.



Also you can select your desired audio tracks and subtitles.



Step 3: Validate the copy configuration. With this window, there'll be undertaking information. Ensure the many info is suitable and click the "start" button to start the burning. You are able to choose the volume of copies you want. If you do not want the window to pop up yet again, you can decide on "Don't pop up again" alternative.



Step 4: Click "start" and Blue-Cloner begins to read the information of the Blu-ray disc.



Step 5: Blue-Cloner will search for BD-R or BD-RW disc instantly just after the conversion. If it finds no BD-R or BD-RW disc, it can pop up the drive and prompt you to insert a BD-R or BD-RW disc. As shown:



If it finds the disc, it will start to burn.


More Info>>


Solution 3 : Pavtube Blu-ray Copy

Step 1. Get prepared for copying
Set up Pavtube Blu-ray Copy, and kick off the application. Crucial gadgets: source disc (it can be Blu-ray disc of any style), target disc (it have to be writable blank Blu-ray disc of more than enough capacity), BD burner. BD-ROM is surely an optional addition, as you will not likely be asked for just a disc change through copying with it.

Step 2. Work out Options
Non permanent Work house is needed for burning discs. By default, Pavtube Blu-ray copy will build a temporary folder named Bluraycopy_temp under the disk with highest absolutely free space as Perform House and delete the folder immediately after copy concluded. Click to the "Options" button and you simply can set the location of momentary folder. Blu-ray copy is time-consuming and we suggest you to examine automobile shutdown box.




Step 3. Complete copy settings with three clicks
Have your supply Blu-ray disc inserted in BD writer/ ROM, then click the " Source" drop-down checklist, decide on the drive, and click on "OK" to load the motion picture. If the source disc is in an external Blu-ray recorder, be certain the recorder is on and hooked approximately your Computer.



Click on "Target" bar and choose the author from drop-down record. The potential of target disc needs to be additional than or not less than equal along with the supply disc. A popup window will remind you to alter a target disc in case the disc inserted has not more than enough house to save lots of supply data files.



When everything is ready, click the “Start” button to start copying Blu-ray and DVD movie to target disc or location. Wait till the copying process ends up and you will get a flawless copy of source Blu-ray disc. As mentioned above, copying Blu-ray disc is quite time-consuming, please be patient.

More Info>>